HP CM8060 / CM8050 Color MFP with Edgeline Technology - System Administrator Guide

DİKKAT: Kullanıcılar bu tür bağlantıları kendileri yapmaya çalışmamalı, elektrikle ilgili yetkiliye veya
elektrikçiye başvurmalıdır. Bu aygıtın Zil Denklik Numarası (REN) 0,7'dir.
Duyuru: Her terminal aygıta atanan Zil Denklik Numarası (REN) telefon arabirimine bağlanmasına izin
verilen maksimum terminal sayısının bulunmasını sağlar. Sadece tüm aygıtların Zil Denklik
Numaralarının toplamı beşi (5,0) aşmaması koşuluyla, aygıtlar arabirim üzerine her kombinasyonda
bağlanabilir. Telefon şebekesine doğrudan bağlanan donanımlar için standart bağlantı kodu (telefon
jakı türü) CA11A'dır.
Yeni Zelanda için telekom açıklaması
General conditions
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted
that the item complies with minimum conditions for connection to its network. It indicates no endorsement
of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance
that any item will work correctly in all respects with another item of Telepermitted equipment of a different
make or model, nor does it imply that any product is compatible with all of Telecom's network services.
Some parameters required for compliance with Telecom's Telepermit requirements are dependent on
the equipment (PC) associated with this modem. The associated equipment shall be set to operate
within the following limits for compliance with Telecom's Specification:
For automatically initiated calls to the same number
(a) There shall be no more than 10 call attempts to the same number within any 30 minute period for a
single manual call initiation, and The equipment shall go on-hook for a period of not less than 30 seconds
between the end of one attempt and the beginning of the next attempt.
For automatically initiated calls to the different numbers
The equipment shall go on-hook for a period of not less than 5 seconds between the end of one attempt
and the beginning of the next attempt.
Auto-answering incoming calls
Incoming calls shall be answered between 3 and 30 seconds of receipt of ringing.
For correct operation of the ringers in each device, the total of the RN's of all devices connected to a
single line at any time should not exceed 5. The RN (Ringer Number) can be found printed on the
Telepermit Label.
Avustralya için telekom açıklaması
In Australia, the fax modem must be connected to the Telecommunication Network through a line cord
which meets the requirements of the Technical Standard AS/ACIF S008.
Japonya için Telecom bildirisi
TRWW Telekom açıklamaları 265