Setting up and configuring Intel AMT in HP Business Notebooks, Desktops, and Workstations - White Paper

20
Configuring IPv6
Both wired and wireless
9
IPv6 can be enabled via an SCS or, as in this example, the WebGUI.
Review the TCP/IPv6 settings for wired and wireless connections, as shown in Figure 15:
– Enable IPv6 (wired): Enabled (Recommended setting; default setting is Disabled)
– Enable IPv6 (wireless): (Implementation-dependent; default setting is Disabled)
Figure 15. Configuring wired and wireless networks for IPv6 via the WebGUI
Implementing wireless connectivity for Intel AMT
Consider the following caveats:
– For desktops, wireless Intel AMT is supported on Compaq Elite 8300 Ultra Slim Desktop and All-in-One (AiO) systems
with the Intel mini PCI express wireless LAN card.
– For business notebooks, wireless Intel AMT is supported on Intel Centrino Advanced-N 6205 802.11 a/b/g/n and Intel
Centrino Ultimate-N 6300 802.11a/b/g/n adapters; wired Intel AMT is supported on Integrated Intel 82579LM Gigabit
Network Connection.
– Intel AMT only supports DHCP and does not support static IP addresses.
– Wired and wireless Intel AMT traffic cannot travel on the same subnet concurrently.
9
Wireless Intel AMT support is not provided on HP Workstation PCs.