HP LaserJet Pro MFP M426, M427 - User Guide

Follow this procedure to change the printer Wi-Fi Direct name using the HP Embedded Web Server (EWS):
Step one: Open the HP Embedded Web Server
1.
From the Home screen on the printer control panel, select the Connection Information button,
and then touch the Network Connected or the Network Wi-Fi ON button to display the IP address
or host name.
2. Open a Web browser, and in the address line, type the IP address or host name exactly as it displays on the
printer control panel. Press the Enter key on the computer keyboard. The EWS opens.
If the Web browser displays a There is a problem with this website’s security certicate message when
attempting to open the EWS, click Continue to this website (not recommended).
NOTE: Choosing Continue to this website (not recommended) will not harm the computer while
navigating within the EWS for the HP printer.
Step two: Change the Wi-Fi Direct name
1. Click the Networking tab.
2. On the left navigation pane, click the Wi-Fi Direct Setup link.
3. In the Wi-Fi Direct Name eld, enter the new name.
4. Click Apply.
HP ePrint via email
Use HP ePrint to print documents by sending them as an email attachment to the printer's email address from
any email-enabled device.
NOTE: The printer might require a rmware update to use this feature.
To use HP ePrint, the printer must meet these requirements:
●
The printer must be connected to a wired or wireless network and have Internet access.
●
HP Web Services must be enabled on the printer, and the printer must be registered with HP Connected.
Follow this procedure to enable HP Web Services and register with HP Connected:
1.
From the Home screen on the printer control panel, touch the Connection Information
button.
2. Open the following menus:
○
ePrint
○
Settings
○
Enable Web Services
3. Touch the Print button to read the terms of use agreement. Touch the OK button to accept the terms
of use and enable HP Web Services
50 Chapter 4 Print ENWW