User's Manual

7. Remove the power supply (see Power supply on page 78).
8. Remove the speakers (see
Speakers on page 74).
9. Remove the side panels (see
Side panels on page 76).
10. Remove the front bezel (see
Front bezel on page 92).
11. Disconnect the backlight cable from the display panel.
NOTE: Replace the backlight cable with the new backlight cable that comes with the new
display panel kit.
Remove the backlight cable from the defective panel before sending the panel back to the
supplier.
Figure 6-84 Disconnecting the backlight cable from the display panel
98 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis