HP DesignJet ColorPro - Getting Started Guide
\HH]^ _L`abI
\HH]^
x Increase separation between equipment and receiver.
x Connect equipment to an outlet on a circuit different from that
to which the receive is connected.
x Consult your dealer or an experienced radio/TV technician.
When connected to
LAN cables using
print server
accessories...
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at
their own expense.
Normes de sécurité (Canada)
Le présent appareil numérique n'émet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques de Classe
B prescrites dans le réglement sur le brouillage radioélectrique édicté
par le Ministére des Communications du Canada.
Connecté à un réseau par des accessoires de serveur, l'appareil
n'émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de Classe A prescrites dans le
réglement sur le brouillage radioélectrique édicté par le Ministère
des Communications du Canada.
DOC statement (Canada)
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio
Interference Regulations of the Canadian Department of
Communications.
When connected to LAN cables using print server accessories, this
digital apparatus does not exceed the Class A limits for radio noise
emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.