HP DesignJet ColorPro - Quick Reference Guide

HP DesignJet ColorPro Series Quick Reference 19
Loading Paper in the Rear Manual Feed
1. Set your driver to pick from the rear manual feed and
print your document.
2. After sending your print job to the printer, the LCD
panel will display the message “MNL FEED LOAD
[TYPE] [SIZE]” where the media type and size are as
specified in your printer driver.
3. Insert the media
into the rear
manual feed at the
back of the
printer, making
sure that the edge
of the sheet is
aligned with the
alignment mark
on the left side of
the slot. Wait for
the printer to grip
the media before
releasing it.
qrg.fm Page 19 Monday, July 5, 1999 8:36 AM