HP DesignJet ColorPro - Quick Reference Guide

8 HP DesignJet ColorPro Series Quick Reference
LEFT BACK
PANEL OUT
The left side of the
back panel has not
been inserted
properly.
Open the rear access
cover and ensure that
the left side of the
panel is properly
installed.
MEDIA IN
TRAY 1,
REMOVE
There is media in Tray
1 which may not be
the type or size that is
specified in your
current print job.
Remove the media in
Tray 1 and press the
button to resume
printing.
If you wish to print
through Tray 1, set
your driver to pick
from Tray 1 and send
the print job before
putting media in Tray
1.
MNL FEED
LOAD [TYPE]
[SIZE]
You have chosen to
print through the rear
manual feed.
Load the paper type
and size as specified in
the LCD panel and
press to continue
printing.
NON HP
[COLOR] CART
A non-HP color
cartridge has been
detected. HP does not
guarantee non-HP
cartridges. The use of
incompatible
cartridges may disrupt
the intricate printing
system, potentially
resulting in reduced
print quality and even
printer damage.
Use original HP ink
cartridges instead.
Message Explanation Solution
qrg.fm Page 8 Monday, July 5, 1999 8:36 AM