HP DesignJet ColorPro - Quick Reference Guide

HP DesignJet ColorPro Series Quick Reference 9
OFFLINE The printer is off-line. Press to set the
printer on-line.
PAPER JAM,
OPEN TOP
COVER
There is paper
jammed in the printer.
Open the top cover to
remove paper. When
finished, close the top
cover and press to
resume printing.
PRESS TO
CONTINUE
To continue your
present task, press the
button.
PRINT-HDS
NOT ALIGNED
The printheads have
not been aligned. For
best print quality,
align the printheads
before the next print
job.
Align the printheads.
See below for
instructions on how to
align printheads.
PRNT-HD
ACCESS
COVER OPEN
The printhead access
cover is open.
Close the cover to
resume printing.
RIGHT BACK
PANEL OUT
The right side of the
back panel has not
been inserted
properly.
Open the rear access
cover and ensure that
the right side of the
panel is properly
installed.
TOP COVER
OPEN
The top cover is open. Close the cover and
press to resume
printing.
TRAY 2 PAPER
GUIDE
REMOVED
One of the paper
guides in Tray 2 has
been removed.
Insert the paper guide
back into Tray 2.
Message Explanation Solution
qrg.fm Page 9 Monday, July 5, 1999 8:36 AM