HP Digital Sender Module - Administrator's Guide

EN
Activity log messages 49
043/00
The SMTP server is now
available.
Notification message only.
●
No action required.
046/00
The SMTP server didn’t
accept the e-mail message
because it was too big.
The e-mail server could not
accept the e-mail message the
HP Digital Sender Module
transmitted because it was
too big.
●
Make sure that the SMTP
server IP address matches
the IP address listed in the
HP Configuration Utility.
●
Increase the maximum
e-mail message size that
your e-mail server will
accept (see the
documentation for that
server).
058/00
The default “From” e-mail
address is not set. Cannot
send e-mail messages if
“From” field is not provided
either at control panel or in
registered user profile.
A default FROM e-mail
address is missing from the
configuration.
●
Make sure the default
FROM e-mail address is
entered correctly in the
HP Configuration Utility.
● If the problem persists,
contact your HP-authorized
dealer
066/00 Internal error (code) An internal error occurred
while trying to process a job.
● Restart the HP Digital
Sender Module.
● If the problem persists,
note the code and contact
your HP-authorized dealer.
066/00 Internal error:
Sender: name
Subject: subject
An internal error occurred
while processing this job.
● Restart the HP Digital
Sender Module.
● If the problem persists,
note the code and contact
your HP-authorized dealer.
066/00 Internal JetSend
Receiver subsystem error
(code).
An internal error occurred
while receiving data from the
HP MFP.
●
Restart the HP Digital
Sender Module.
●
If the problem persists,
note the code and contact
your HP-authorized dealer.
Activity Log Messages (continued)