Setup guide
HP Photosmart C8100 All-in-One series
2
1
802.11
Ethernet
USB
3
/HP Photosmart C8100 Tout-en-un série
Commencez ici
Retirez le ruban adhésif et le fi lm protecteur
du couvercle, ainsi que de l’avant et de l’arrière
du périphérique.
Soulevez l’écran graphique couleur et retirez
le fi lm protecteur. Vous pouvez positionner l’écran
pour améliorer l’affi chage.
a.
b.
Utilisateurs d’un réseau sans fi l (802.11) ou câblé
(Ethernet) : suivez les instructions du guide
de confi guration pour ajouter le périphérique
HP Tout-en-un sur votre réseau.
Utilisateurs de câbles USB : ne connectez
pas le câble USB avant la section A.
Vérifi ez le contenu du carton. Le contenu du carton
peut varier.
*Peut être inclus
Start Here
Remove all tape, and protective fi lm from the
lid and from the front and back of the device.
Lift the color graphics display and remove
the protective fi lm. You can adjust the angle
of the display to a position suitable for
viewing.
a.
b.
USB cable users: Do not connect the USB
cable until Section A.
Wireless (802.11) or wired (Ethernet) network users :
you must follow the instructions in this setup guide
to be successful adding the HP All-in-One to your
network.
Verify the box contents. The contents of your
box may differ.
*May be included
ab
*
*
*
EN
EN
EN
FR
FR
FR
EN
FR
EN FR
HP Photosmart C8100 All-in-One series
Basics Guide