EMEA_Cover.fm Page 1 Tuesday, May 13, 2003 3:35 PM hp business inkjet 1100d •1100dtn getting started guide before setup guide de mise en marche avant l’installation • Windows: Install the printer software first. • Windows : Commencez par installer le guia de primeiros passos guía de instalación inicial Only connect the USB or parallel cable when prompted. • Network and Mac OS: Connect the printer before installing the printer software.
EMEA_90008.book Page 1 Thursday, April 17, 2003 3:53 PM Copyright Information Informations sur le copyright © Copyright Hewlett-Packard Company 2003 All Rights Reserved. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. Edition 1, 9/2003 © 2003 Hewlett-Packard Company Tous droits réservés.
EMEA_90008.book Page 2 Thursday, April 17, 2003 3:53 PM Safety Information Consignes de sécurité Always follow basic safety precautions when using this product to reduce risk of injury from fire or electric shock. Pour éviter les risques de blessures dûs aux flammes et aux chocs électriques, toujours respecter les précautions de sécuritées en utilisant cet appareil. 1 Read and understand all instructions in the documentation that comes with the printer.
EMEA_90008.book Page 3 Thursday, April 17, 2003 3:53 PM 1 1 2 10 3 7 4 5 9 8 6 Español Português Français English 11 12 Step 1: Check the package contents. 1) HP Business Inkjet 1100 series printer, 2) power adapter (C8124-60014 or C6436-60002), 3) power cord, 4) four ink cartridges (CMYB), 5) four printheads (CMYB), 6) install supplies flyer(!), 7) Starter CD (software and electronic documentation), 8) printed documentation (setup poster, getting started guide, HP customer support guide).
EMEA_90008.book Page 4 Thursday, April 17, 2003 3:53 PM 4 3 2 3 2 1 5 7 6 Step 2: Remove the packing tape and materials. Remove all packing tape from the outside of the printer and the trays. Open the printing supplies cover and remove the tape from the inside of the printer. Step 3: Identify printer parts (front). 1) Output tray, 2) paper guides, 3) top cover, 4) control panel, 5) printing supplies cover, 6) Tray 1, 7) tray extension. Etape 2 : Retirez les matériaux d’emballage.
EMEA_90008.book Page 5 Thursday, April 17, 2003 3:53 PM 1 1 2 a b c 3 2 4 4 3 Identify printer parts (back). 1) Universal serial bus (USB) port, 2) slot for a parallel connector or print server, 3) power input, 4) slot for the auto-duplex unit. Identifiez les éléments du panneau de commande.
EMEA_90008.book Page 6 Thursday, April 17, 2003 3:53 PM 4 5 Step 4: Install the auto-duplex unit. On the back of the printer, insert the auto-duplex unit until it clicks. Step 5: Install Tray 2 (HP Business Inkjet 1100dtn). Set the printer on top of Tray 2. WARNING! Be careful to keep your fingers and hands clear of the bottom of the printer. Etape 4 : Installez l’unité auto-duplex. À l’arrière de l’imprimante, insérez l’unité auto-duplex jusqu’à son enclenchement.
EMEA_90008.book Page 7 Thursday, April 17, 2003 3:53 PM 7 6 1 3 2 Español Português Français English 1 Step 6: Connect the power cord. 1) Plug the power adapter into the printer. 2) Connect the power cord to the power adapter. 3) Plug the other end of the power cord into an alternating current (AC) power outlet. Note: Connect the printer to the computer only when prompted to do so during installation. Step 7: Load paper in the trays. 1) Pull the tray out of the printer.
EMEA_90008.book Page 8 Thursday, April 17, 2003 3:53 PM 6 3 4 5 3) For paper between 11 inches and 14 inches (356 mm and 279 mm) long, move the latch on the tray to the right; 4) then lower the front of the tray. 5) Slide the guides in the tray to adjust them for the size that you are loading. 6) Insert up to 150 sheets of paper into Tray 1 or 250 sheets of paper into Tray 2. Note: Tray 2 can be loaded only with plain paper.
EMEA_90008.book Page 9 Thursday, April 17, 2003 3:53 PM 8 1 7 8 Step 8: Install the ink cartridges. 1) Open the printing supplies cover. 2) Remove each ink cartridge from its package. CAUTION: Use only HP ink cartridges. Damage to the printer that results from modifying or refilling HP ink cartridges, or from using non-HP ink cartridges, is not covered under the warranty. 7) Replacez le bac de sortie (si vous avez chargé le bac 1). 8) Replacez le bac dans l’imprimante.
EMEA_90008.book Page 10 Thursday, April 17, 2003 3:53 PM 9 3 1 3 4 2 3) Align the arrow on each cartridge with the arrow on its color-coded slot, and then insert the cartridge into the slot. 4) To ensure proper contact, press down firmly on the cartridges until they snap into place. Note: All four ink cartridges must be correctly installed for the printer to work. Step 9: Turn the printer on and install the printheads. 1) Press the (power button) to turn on the printer.
EMEA_90008.book Page 11 Thursday, April 17, 2003 3:53 PM 5 8 4 6 7 7) Pull the printhead latch all the way forward and down. 8) Push the latch toward the back of the printer. Make sure that the hook engages the metal catch bar. Note: You might have to apply some pressure to close the latch. 4) Retirez les éléments d’emballage de l’emplacement des têtes d’impression. 5) Sortez chaque tête d’impression de son emballage, puis retirez le ruban adhésif de protection de chacune d’elles.
EMEA_90008.book Page 12 Thursday, April 17, 2003 3:53 PM 2 1 9) Close the printing supplies cover. The printer aligns the printheads and prints two alignment pages. This process takes approximately 5 minutes. If the printer prints the two alignment pages, go to Step 10. If it does not print, follow these steps. 1) Check that the power cord is connected firmly. 2) Check that the printheads and ink cartridges are properly installed. 3) Check that the auto-duplex unit is installed.
EMEA_90008.book Page 13 Thursday, April 17, 2003 3:53 PM 10 5 Español Português Français English 4 4) Check that no lights on the control panel are blinking. If a light is blinking, check the indicated supply, or see the user’s guide on the Starter CD to interpret the message. 5) Check that the top cover and printing supplies cover are closed. 6) If the pages still fail to print, contact HP customer support. See the HP customer support guide that came with the printer.
EMEA_90008.book Page 14 Thursday, April 17, 2003 3:53 PM 11 • For the HP Business Inkjet 1100d, remove the slot cover and insert the parallel connector as shown until it clicks. Note: Do not connect the cable yet (occurs when you install the software). Step 11: Install the software. 1) If you are using the network connection, install the HP Jetdirect software to configure the print server. Otherwise, go to step 2 below.
EMEA_90008.book Page 15 Thursday, April 17, 2003 3:53 PM Español Português Français English 12 If using the USB ( ) or parallel ( ) connection, connect the cable (sold separately) when prompted during installation. (For parallel connection, remove the slot cover first.) Connect only a parallel cable or a USB cable—not both.
EMEA_90008.book Page 16 Thursday, April 17, 2003 3:53 PM 13 Step 13: Register the printer. Register the printer to receive important support and technical information. If you did not register your printer while installing the software, you can register later at http://www.register.hp.com. Congratulations! Your printer is ready to use. For information about using the printer and troubleshooting, see the following resources: • onscreen user’s guide on the Starter CD.
EMEA_90008.
EMEA_90008.
EMEA_90008.
EMEA_90008.
EMEA_90008.
EMEA_90003.
EMEA_90008.book Page 1 Thursday, April 17, 2003 3:53 PM printed on recycled paper imprimé sur papier recyclé copyright © 2003 Hewlett-Packard Company printed in USA imprimé aux Etats-Unis http://www.hp.
