HP MFP Analog - (multiple language -Americas) Fax Guide

8 Chapter 1 Setting up ENWW
Connecting the parallel cable
1 Locate the 2 parallel cables (blue cords in Figures A & B) that came
with the fax accessory. Choose the parallel cable that is appropriate
for your mfp: use the shorter parallel cable if the fax accessory is
mounted on the side of the mfp (shown in figure A below); use the
longer cable if the fax accessory is mounted on the back of the mfp
(shown in figure B below).
Note Two cables are provided because the fax accessory can be used with
various mfp’s that require different cables.
2 Connect one end of the parallel cable to the parallel port on the
back of the fax accessory.
3 Connect the other end to the parallel port on the back of the mfp, as
shown for both types of mfps in the figures below.