HP MFP Analog - (multiple language -Americas) Fax Guide

18 Chapter 2 Faxing ENWW
5 In the Send Options screen, select Fax as the destination.
6 If prompted, enter your user name and password.
7 Type the fax number using the numeric keypad on the mfp’s control
panel.
8 Press START to begin sending.
9 If you choose two-sided in the Describe Original screen, you might
be prompted to turn over the originals so that all pages are sent in
the correct order.
• ADF: Wait for the first side to finish scanning. If required, reload
the document so that the second side can be scanned.
• Glass: Remove each page when it is finished scanning, and
place the next page on the glass.
10 When you are finished, remove the document from the mfp.
To send a fax to multiple recipients
1 Follow the procedure “To send a fax to one recipient” on page 17
through step 6.
2 For step 7, keep adding fax numbers to the vertical list either
manually or using the speed dial option until you have entered all
the numbers.
3 Complete the remaining steps in the procedure.
To send a fax using speed dial (group dial)
1 Follow the procedure “To send a fax to one recipient” on page 17
through step 6.
2 For step 7, select Speed Dial and add one or more fax numbers to
the vertical list until you have entered all the numbers.
3 Complete the remaining steps in the procedure.
To send a fax job using multiple page sizes
Sending a fax using job mode allows you to send multiple page sizes in
a single fax job.
1 On the control panel, press the menu button to access the main
menu.
2 In the Describe Original screen, select Job Mode.