HP MFP Analog - (multiple language -Americas) Fax Guide

22 Chapter 2 Faxing ENWW
Changing the input and output trays for incoming faxes
You can select which printer input tray to use for printing incoming faxes.
If your mfp has multiple output trays, you can also select a printer output
tray for the printed faxes.
To change the input and output trays
1 On the control panel, press the menu button to access the main
menu.
2 Select CONFIGURE DEVICE.
3 Select the FAX menu.
4 Select FAX RECEIVE.
5 To set up the input tray, select FAX INPUT TRAY and select the
appropriate printer tray.
6 If the mfp has multiple output trays, select FAX OUTPUT TRAY and
select the appropriate printer tray.
7 From the INFORMATION MENU, print a configuration page to
determine the input and output tray numbering.
Changing the volume setting
You can adjust the volume for the fax accessory modem.
To change the volume setting
1 On the control panel, press the menu button to access the main
menu.
2 Select CONFIGURE DEVICE.
3 Select the FAX menu.
4 Select GENERAL.
5 Select MODEM VOLUME.
6 Select the desired volume setting.