HP MFP Analog - (multiple language -Americas) Fax Guide

24 Chapter 2 Faxing ENWW
Setting tone or pulse dialing
You can set the fax accessory to use either tone or pulse dialing.
To set tone or pulse dialing
1 On the control panel, press the menu button to access the main
menu.
2 Select CONFIGURE DEVICE.
3 Select the FAX menu.
4 Select FAX SEND.
5 Select DIALING MODE.
6 Select either tone or pulse.
Setting redial rules
You can select how many times the fax accessory should retry if it gets a
busy signal or no answer. You can also specify the retry interval.
To set redial rules
1 On the control panel, press the menu button to access the main
menu.
2 Select CONFIGURE DEVICE.
3 Select the FAX menu.
4 Select FAX SEND.
5 To set the retry information, select from the following options:
•Select RETRY COUNT BUSY
•Select RETRY COUNT NO ANSWER
•Select RETRY INTERVAL
Note Each option can be set independently and in any order.
6 Type in the desired setting.