HP MFP Analog - (multiple language -Americas) Fax Guide

6 Chapter 1 Setting up ENWW
Parts included with the fax accessory
The following components are included in your package:
● fax accessory with modem card installed
● fax accessory mounting bracket
● phone cord
● power supply
● power cord
● parallel cables (2)
● manual
● support flyer
Attaching the fax accessory to the mfp
1 Unpack the fax accessory.
2 Make sure that the PCMCIA communications card is firmly seated.
Push on it slightly to make sure it has not come loose.
Note HP recommends using only the PCMCIA card that came with the fax
accessory to ensure that it functions correctly.
3 Make sure that the DIP switches next to the parallel port are in the
correct position, as shown below.
Note You will not be changing the position of these switches unless their settings
have been accidentally changed during shipping or rearranging.
,