HP PCL/PJL reference (PCL 5 Printer Language) - Technical Reference Manual Part II

EN CF, Character Fill Mode 23-23
Figure 23-11
PW.1;CF3,1;LBB*; Set the pen width to .1 mm; select character
fill mode 3 (fill & edge) and edge with pen
number 1 (black); print the letter “B”.
PW.5;LBC*; Set the pen width to .5 mm to change the
thickness of the fill lines; print the letter “C”.
E
C
%0A Enter the PCL mode.
E
C
E Send a reset to end the job and eject the
page.
Table 23-9
Related Commands Groups
DI, Absolute Direction The Character Group
DR, Relative Direction
SB, Scalable or Bitmap Fonts
FT, Fill Type The Line and Fill
Characteristics Group
Table 23-8 Example: Using the CF Command (continued)