HP PCL/PJL reference (PCL 5 Printer Language) - Technical Reference Manual Part II

23-56 The Character Group EN
Figure 23-30
FN, Select Secondary Font
This command allows any accessible font that has been assigned a
font ID number to be selected as the secondary (alternate) font (the
font characteristics are assigned to the secondary font). The font must
be accessible to the printer as either a resident font, a downloaded
font, or a loaded cartridge font. To be selected, the font must have
been previously assigned a font ID number in PCL mode. Also, the
FN command must be accompanied by an AD command specifying
the font’s point size (see the “Using the FI Command” example).
FN font_ID[;]
Table 23-29
Related Commands Group
AD, Alternate Font Definition The Character Group
LB, Label
SA, Select Alternate Font
SD, Standard Font Definition
SS, Select Standard Font
E
C
(#X, Select Primary Font by ID # PCL Commands
E
C
)#X, Select Secondary Font by ID #
E
C
)*c#D, Assign Font ID
E
C
)*c6F, Font Control, Copy Assign
Parameter Format Functional Range Default
font_ID integer 0 to 32767 no default