HP PCL/PJL reference (PCL 5 Printer Language) - Technical Reference Manual Part II

23-68 The Character Group EN
Note The FI and FN commands implicitly change the value of SB. For
example, if SB = 0 and FI selects a bitmap font, SB is set to 1.
SD, Standard Font Definition
Defines the standard font and its characteristics: symbol set, font
spacing, pitch, height, posture, stroke weight, and typeface.
SD kind,value...[,kind,value;]
or
SD [;]
* Refer to the table following the parameter descriptions.
Table 23-38 AffectedCommands
Command Limitation
CF Bitmapped characters cannot be edged.
DI,DR Bitmapped characters can be printed only
with orthogonal directions (0°, 90°, 180°,
or 270°).
SI,SR Sizes of bitmapped fonts are approximate
only.
SL The Slant command is ignored for
bitmapped fonts.
AD,SD,CP,LB
Parameter Format Functional Range Default
kind clamped
integer
1 to 7 no default
value clamped
real
kind dependent* kind dependent*