HP PCL/PJL reference - Printer Job Language Technical Reference Manual

EN Product-Specific Feature Support A-63
HP Color LaserJet 4500 Series Comments
This section describes some of the distinguishing PJL features of the
HP Color LaserJet 4500 series printers.
• The JOBID variable is added to enable or disable the job ID
information returned in the status readback at the start and
end of jobs.
• HP Color LaserJet 4500 series printers may remove the JOB
DISPLAY = "display text" message from the control
panel display before the last page reaches the output bin.
• The control panel display messages and status readback text
can now be set to the Japanese language.
• The OUTTONER variable determines how the printer
processes a toner-out event. If this variable is set to STOP,
printing will stop when a toner-out event occurs. If this variable
is set to CONTINUE, a toner-out message will be generated,
but printing will continue. The default value for this variable is
STOP.
• The PLANESINUSE variable defines the number of planes of
data in a job. A value of 1 indicates a monochrome job, while a
value of 3 indicates a color job. The default value is 3.
• This printer adds some new POWERSAVETIME values (1,
240, 480 minutes), and does not support the 15 and 180
minute values.