HP PCL/PJL reference - Printer Job Language Technical Reference Manual

EN PJL Status Codes D-11
Auto-Continuable Conditions (30xxx)
This list specifies the set of PJL error codes and corresponding
control panel display strings for auto-continuable conditions. If no
action is taken, the device automatically continues if auto-continue is
set to true (except for 30035 and 30036 errors).
Status Code Display String or Code Meaning
30010 * STATUS BUFFER OVERFLOW
30016 20 MEM OVERFLOW or 20 MEMORY OVERFLOW
DATA LOST or 20 INSUFFICIENT MEMORY,
PRESS GO KEY
30017 21 PRINT OVERRUN or 21 PRINT OVERRUN DATA
LOST or 21 PAGE TOO COMPLEX
30018 40 ERROR or 40.1 HP MIO 1 ERROR
or 40.2 HP MIO 2 ERROR or
40 SER IO ERROR
30027 22 I/O CONFIG ERROR or 22 SER IO ERROR
22 HP MIO 1 IO ERROR CHECK SETUP or 22 HP
MIO 2 IO ERROR CHECK SETUP or 22 PARALLEL
IO ERROR CHECK SETUP
30034 41.x ERROR or 41.3 PAPER ERROR
30035 68 ERROR CHECK CONFIGURATION or 68
NVRAM ERROR, SETTINGS NOT SAVED or 68
ERROR
30036 68 SERVICE or 68 NVRAM FULL CHECK
CONFIGURATION or 68 NVRAM ERROR,
SETTINGS NOT SAVED
30072 49 REMOVE PAGE
30076 PERSONALITY MEMORY OVERFLOW/ OUT OF
MEMORY
30094 41.1 GENERAL MISPRINT ERROR
* If creating applications for the HP LaserJet 4 and 5 printer families, see
“Printer Status Readback” in the “HP LaserJet 4 and 5 Printer Family
Comments” section in Appendix A.