HP PCL/PJL reference - Printer Job Language Technical Reference Manual

EN Environment Commands 6-19
MPTRAY Returns the configuration value of the
multi-purpose tray.
CASSETTE,
MANUAL, FIRST
ORIENTATION Page orientation. PORTRAIT,
LANDSCAPE
OUTBIN Sets the default output bin. (For
HP LaserJet 4Si, 4SiMx, 4000 series,
5Si, 5SiMx, 5Si Mopier printers, the
UPPER output bin is a face-down,
correct-order bin. The LOWER output
bin is a face-up reverse-order bin.)
UPPER, LOWER,
OPTIONALOUT-
PUTBIN1, . . .
OPTIONALOUT-
PUTBIN62
OUTBINPROCESS Supplies external finishing devices with
the type of finishing requested for the
current job. The value is unused by the
printer and is simply passed to the
device. The actual values are
device-specific and therefore are not
documented here (the device
manufacturer must assign values for the
specific processes handled by that
device).
0 to 255
OUTLINEPOINTSIZE Sets the point size used by PCL-XL to
switch from printing characters as
bitmaps to printing them as outlines.
0 to 999
OUTTONER Determines how the printer processes a
toner- out event. If this variable is set to
STOP, printing will stop when a
toner-out event occurs. If this variable is
set to CONTINUE, a toner-out message
will be generated but printing will
continue. The default value for this
variable is STOP.
STOP, CONTINUE
PAGELENG TH-
ACCURACY
Specifies whether the absolute
accuracy of the image length can be
sacrificed in situations when image
banding may occur. For CAD and GIS
drawings, the recommended setting is
MAXIMUM; for photographic images it
is OPTIMIZED (DesignJet 1000
Series).
EXACT,
OPTIMIZED,
CONSTANT,
MAXIMUM
General PJL Environment Variables (continued)
Variable Description
Sample Value
Range