User's Manual

5
Inserting the Batteries
Open the battery cover.
Slide the battery cover in the
direction indicated by the
arrow.
Insert the batteries.
Insert two AA-size batteries
with the positive (+) and
negative (-) poles matching
the directions indicated
inside the battery room.
Close the battery cover.
Low Battery Indicator
A low battery indicator
appears on the LCD screen when the batteries are nearly
exhausted. Batteries should be replaced promptly when the low battery indicator
appears.
Risk of explosion if battery is replaced by an incorrect type dispose of used
batteries according to the instructions.
Be sure to turn off the camera power before insert or remove batteries.
It is recommended to use compatible batteries listed on page 20. Use of any
other battery types is NOT supported.
Replace all batteries at the same time. Never mix old and new batteries.
Remove batteries if you do not intend to use the camera for an extended period
of time.
The camera body may feel warm after extended use. This is normal.
The type and power level of the battery may cause the lens to not extend or retract
properly. Ensure you use the correct battery type and adequately charged battery.
About Battery Type
page 20).(
1
2
3
C
C
a
a
u
u
t
t
i
i
o
o
n
n
To ensure the camera displays battery level correctly, after batteries are loaded, set the
battery type in Setup Menu to match the batteries used.