HP Color LaserJet CP3505 Series Printers - User Guide

Print Quality sub-menu
Use this menu to adjust all aspects of print quality, including calibration, registration, and color half tone
settings.
Menu item Values Description
ADJUST COLOR HIGHLIGHTS
MIDTONES
SHADOWS
RESTORE COLOR
VALUES
Modifies the half tone settings for each color. The default for each color
is 0.
SET REGISTRATION PRINT TEST PAGE
SOURCE
ADJUST TRAY 1
ADJUST TRAY 2
ADJUST TRAY 3
Shifts the margin alignment to center the image on the page from top to
bottom, and left to right. You can also align the image that is printed on
the front with the image that is printed on the back.
AUTO SENSE MODE TRAY 1 SENSING
TRAY >1 SENSING
If a tray is configured to PLAIN or ANY SIZE, and the print job does not
specify the media type, the printer will adjust the print quality for the type
of print media it senses. The default for tray 1 is FULL SENSING, which
senses transparencies, glossy paper, and tough paper.
PRINT MODES A list of media types
appears. When you select
a type, a list of available
modes appears.
Associates each media type with a specific print mode.
OPTIMIZE A list of parameters
appears.
Optimizes certain parameters for all jobs rather than (or in addition to)
optimizing by paper type.
EDGE CONTROL OFF
LIGHT
NORMAL
MAXIMUM
Controls how edges are printed.
AUTO CLEANING OFF (default)
ON
Select this option to turn automatic cleaning on or off.
QUICK CALIBRATE
NOW
Performs a limited printer calibration.
FULL CALIBRATE
NOW
Performs all printer calibrations to optimize print quality.
DELAY
CALIBRATION AT
WAKE/POWER-ON
NO
YES
Prints before the calibration process after turning on the printer or
bringing it out of sleep mode.
ENWW Configure Device menu 19