HP Color LaserJet CP3505 Printer - Software Technical Reference

When this option is selected, you must use one of the following options in the Paper type setting:
●
Letterhead
●
Preprinted
NOTE: Alternative Letterhead Mode is available only if the printer is equipped with an
automatic duplexing unit.
●
Raster Compression
NOTE: The Raster Compression option is available only in the HP PCL 6 Print Driver. It
is not available in the HP PCL 6 Black Print Driver, the HP PCL 5c Print Driver, or the PS
Emulation Print Driver.
Use the Raster Compression feature to select the graphics-compression method:
●
Automatic. The software determines the best compression method to use.
●
Best Quality. This option forces the software to use a lossless compression method.
(Lossless means that no data is lost during compression.)
●
Maximum Compression. Where applicable, this option requires the software to always use
a lossy compression method (some data is lost).
Layout Options
The Layout Options setting contains the Page Order setting.
Page Order specifies the order in which the pages of your document are printed. Front to Back prints
the document so that page 1 prints first. Back to Front prints the document so that page 1 prints last.
NOTE: The page-ordering operation works on whole sheets of media rather than on individual
logical pages. Accordingly, if you set Pages per Sheet (on the Finishing tab) to be greater than
one, the ordering of logical pages on a physical sheet of media does not change.
118 Chapter 4 HP PCL 6, PCL 6 Black, PCL 5, and PS emulation print drivers for Windows ENWW
HP print drivers for
Windows