HP Color LaserJet CP3505 Printer - Software Technical Reference

Table 4-3 Page orientation

Orientation (Finishing tab) Flip Pages Up selected Flip Pages Up not selected

Portrait Short-edge binding Long-edge binding

Landscape Long-edge binding Short-edge binding

When Print on Both Sides is selected, the document preview image changes to show a spiral binding

along either the left edge or the top edge of the page. In addition, a folded-over corner appears in the

lower-right portion of the preview image, indicating that printing occurs on the back side. An arrow on

the folded-over corner points in the direction that the pages would be flipped if they were bound together.

Short-side binding is for print jobs with pages that read by flipping over like the pages of a calendar.

Long-side binding is for print jobs with pages that read by turning like the pages of a book.

Booklet layout

The Booklet Layout drop-down menu, visible when Print on Both Sides is selected, offers choices

that are based on the current media size. The default setting for the Booklet Printing drop-down menu

is Off. The other settings have the following format, where [paper size] depends on the media size that

is set on the Paper/Quality tab:

●

Left Edge Binding

●

Right Edge Binding

When you select Left Edge Binding or Right Edge Binding, the document preview image changes to

show the location of the binding. If the Pages per Sheet setting is on the default setting of 1, it

automatically changes to 2 pages per sheet. If you change the Pages per Sheet setting manually to

4, 6, 9, or 16 pages per sheet, the booklet setting is disabled. See the

Pages per Sheet on page 146

section of this chapter for more information.

Book and Booklet Printing

The HP Color LaserJet CP3505 supports book and booklet printing.

A book is a print job consisting of at least two pages. It can have a different media type for the front

cover, first page, other pages, last page, or back cover. Use the Front Cover, First Page, Other

Pages, Last Page, and Back Cover settings on the Paper/Quality tab (available when you select

the Use Different Paper check box) to select different media for the front cover, first page, other pages,

and back cover. For more information, see

Paper/Quality tab features on page 124 in this chapter.

A booklet is a print job that places two pages on each side of a sheet that can then be folded into a

booklet that is half the size of the media. Use the Booklet Layout drop-down menu on the Finishing