HP Color LaserJet CP3505 Printer - Software Technical Reference

Removing external fonts
1. Click Start.
2. Select Settings.
3. Click Printers (Windows 2000) or Printers and Faxes (Windows XP Professional and Windows
Server 2003), Printers and Other Hardware Devices (Windows XP Home), or or Hardware and
Sound (Windows Vista).
4. Right-click the name of the product.
5. Click Properties.
6. Click the Device Settings tab.
7. Click the External Fonts option. The Properties button appears.
8. Click Properties. The HP Font Installer dialog box appears. The external fonts that are installed
appear in the Installed Fonts window.
9. Select the fonts that you want to remove, and then click Remove. The fonts are removed.
10. Click OK to close the HP Font Installer dialog box.
PS Emulation Print Driver Device Settings
The following controls are available and appear only in the PS Emulation Print Driver Device
Settings tab.
Available PostScript Memory
This control specifies the amount of available postscript memory and provides a spin box for changing
this value. The available postscript memory is a subset of the product total physical memory. It is usually
best to set the postscript memory to match what is shown on the configuration page. To print a
configuration page from the product control panel, follow these steps:
1. Press
(the select button; the one with the check mark) to open the menus.
2. Press
(the up button) and (the down button) to scroll to INFORMATION, and then press
.
3. Press
and to scroll to PRINT CONFIGURATION.
4. Press
to print the configuration page.
Output Protocol
This control specifies the protocol that the product uses for print jobs. The following options are
available:
●
ASCII (default)
●
TBCP
●
Binary
When you click ASCII, data is sent in ASCII format (7-bit), which might take longer to print but can be
sent through any I/O channel, such as a serial, parallel, or network port.
ENWW Device Settings tab features 167
HP print drivers for
Windows