HP Color LaserJet CP3505 Printer - Software Technical Reference

If your environment does not support bidirectional communication, the Update Now setting is
unavailable, so you must manually configure the options on this tab.
If you have more than one driver installed for the product (for example, the default HP PCL 6 Print Driver
and the HP PCL 5 Print Driver), the Update Now feature works automatically only on the driver on which
it is activated. The other driver will not be updated, and might show the default setting for the specific
product model.
Tray 3
This control specifies whether you have tray 3, an additional 500-sheet tray, installed on the product.
The default setting is Not Installed. Tray 3 comes standard on the HP Color LaserJet CP3505x printer
model.
Duplex Unit (for 2-Sided Printing)
The HP Color LaserJet CP3505dn and the HP Color LaserJet CP3505x printer models come with a
duplex unit installed. This setting is enabled (Installed) by default.
NOTE: These printer models support smart duplexing. The product uses the smart duplexing
feature to detect information on both sides of the print job pages and runs the pages through the
duplexing unit only if there is printable information on the second side of the page.
The HP Color LaserJet CP3505 printer supports smart duplexing. The product uses the smart
duplexing feature to detect information on both sides of the print job pages and only runs the
pages through the duplexing unit if printable information appears on the second side of the page.
Allow Manual Duplexing
Select Allow Manual Duplexing to print on both sides of any size and most types of media (except
transparencies, envelopes, and labels). To use this feature, you must reinsert the media stack into the
input tray to print the second side. The product pauses while you make this adjustment.
This setting is enabled by default.
Printer Memory
This option matches the setting to the amount of memory that is installed in the product. The driver
generates ranges of memory that can be selected, up to the maximum that the product can accept. The
driver can use this information to manage how the print driver uses the product memory.
Printer Hard Disk
When this option is enabled, the Job Storage option and the Mopier Mode are enabled in the print
driver. Use the Job Storage option to store print jobs and then print them later from the control panel.
The multiple-original print (mopy) function is an HP-designed feature that produces multiple, collated
copies from a single print job.
Job storage
When Job Storage is enabled, the product can store print jobs so that you can gain access to those
print jobs later at the control panel.
170 Chapter 4 HP PCL 6, PCL 6 Black, PCL 5, and PS emulation print drivers for Windows ENWW
HP print drivers for
Windows