HP LaserJet P2010 Series - Software Technical Reference

The First Page, Other Pages, and Last Page options are as follows:
●
Size is: drop-down menu
●
Source is: drop-down menu
●
Type is: drop-down menu
The Size is: driver setting for the first page applies to the entire print job. When this is set, the setting
becomes unavailable for all the other Use Different Paper/Covers options.
Document preview image
The document preview image is a line-drawn image of a page that represents graphics and text. The
document preview image is always oriented so that the contents of the page are right-side-up. The
document preview image appears in the upper-right corner of the Paper/Quality, Effects, and
Finishing tabs.
Switching between tabs does not change the location or appearance of the document preview image.
Move the mouse over the document preview image, and the mouse cursor changes from an arrow to a
gloved hand. Toggle between portrait and landscape page orientation by clicking on the image.
Print Quality
The Print Quality group box contains the Print Quality drop-down box and the EconoMode check
box.
The default setting for Print Quality is FastRes 1200.
This setting controls resolution, which refers to the number of dots per inch (dpi) used to print the page.
As resolution is increased, the quality (clarity and visual appeal) of print on the page is improved.
However, higher resolution might also result in longer printing times. The following Print Quality options
are available in the drop-down box:
●
FastRes 1200
●
600 dpi
Select the EconoMode check box in conjunction with any of the print quality settings. When using
EconoMode, the device uses less toner on each page. Using this option might extend the life of the print
cartridge and can lower the cost per page, but also reduces print quality. Using the EconoMode feature
with non-HP print cartridges can result in toner spillage or device damage.
86 Chapter 4 Host-based driver for Windows ENWW