HP LaserJet P2010 Series - Software Technical Reference

Click Close to exit the installer.
Printer setup
After installing the printing-system software in Macintosh operating systems, the printer must be set up.
Topics:
●
Set up a printer with Mac OS X V10.4.x
●
Set up a printer with Mac OS X V10.3.x
●
Set up a printer with Mac OS X V10.2.x
●
Troubleshooting the printer setup
Set up a printer with Mac OS X V10.4.x
Carry out these steps after the software installation is complete.
1. If you are installing the printer using a USB or parallel connection, connect the USB cable or the
parallel cable between the HP LaserJet P2010 Series printer and the computer. Turn on the printer.
If you are installing using a network connection, verify that the network cable is connected to the
printer and the printer is on.
2. In the Applications folder, open the Utilities folder, and then run the Printer Setup Utility. The
Printer List appears. It looks similar to the one shown in the following figure.
Figure 5-9 Printer list screen
You can also configure the printer using the Print & Fax pane of System Preferences (from the
Apple menu, choose System Preferences..., then choose Print & Fax).
Figure 5-10 Print & Fax screen
114 Chapter 5 Macintosh software and utilities ENWW