HP LaserJet P2010 Series - Software Technical Reference

Set up a printer with Mac OS X V10.3.x
1. If you are installing the printer using a USB or parallel connection, connect the USB cable or parallel
cable between the HP LaserJet P2010 Series printer and the computer. Turn on the printer. If you
are installing using a network connection, verify that the network cable is connected to the printer
and the printer is on.
2. In the Applications folder, open the Utilities folder, and then run the Printer Setup Utility.
Figure 5-13 Printer List screen
You can also configure the printer using the Print & Fax pane of System Preferences (from the
Apple menu, choose System Preferences..., then choose Print & Fax).
3. If you are installing the printer using a USB or parallel connection, verify that the printer appears
on the printer list. (In the Print & Fax screen, click the Set Up Printers... button to see the printer
list.) The Kind column in the printer list should display HP LaserJet P2010 Series. If this is the
case, the setup is complete.
If the printer does not appear, or if the correct information does not appear in the Kind column,
see
Troubleshooting the printer setup on page 117.
If you are installing the printer using a network connection, continue with the following steps.
4. Click Add (or the Set Up Printers... button in the Print & Fax screen, and then Add) to open the
add printer screen.
5. Select the Rendezvous network connection protocol in the top pull-down menu.
6. Select the HP LaserJet P2010 Series printer in the Name list. The Printer Model and Model
Name are selected automatically.
NOTE: If the HP LaserJet P2010 Series printer does not appear in the list, verify that the printer
is powered on and connected to the network. If it still does not appear, try turning the printer off
and then on again. Finally, turn the computer off and then on again, then restart the setup process.
For more troubleshooting information, see
Troubleshooting the printer setup on page 117.
7. Click Add. The HP LaserJet P2010 Series printer appears in the Printer List.
Set up a printer with Mac OS X V10.2.x
1. If you are installing the printer using a USB or parallel connection, connect the USB cable or parallel
cable between the HP LaserJet P2010 Series printer and the computer. Turn on the printer. If you
are installing using a network connection, verify that the network cable is connected to the printer
and the printer is on.
116 Chapter 5 Macintosh software and utilities ENWW