HP LaserJet P2010 Series - Software Technical Reference

Windows
The HP LaserJet P2010 Series printing-system software has the following minimum Windows system
requirements:
●
Supported Windows operating-systems:
◦
Windows 98 Second Edition (Windows 98 SE)
◦
Windows Millennium Edition (Windows Me)
◦
Windows NT 4.0 (parallel-port connection only)
◦
Windows 2000
◦
Windows Server 2003 (32-bit and 64-bit)
◦
Windows XP (32-bit and 64-bit)
◦
Windows Vista (32-bit and 64-bit)
●
Processor and RAM requirements:
◦
For Windows 98 SE, Windows Me, and Windows NT 4.0: a Pentium® II processor or greater,
with 64 MB of RAM (for a driver-only installation)
◦
For Windows 2000, Windows Server 2003, Windows XP, and Windows Vista: a Pentium II
processor or greater (Pentium III or greater recommended), with 192 MB of RAM (for a full
installation)
●
250 MB of available hard disk space
●
A 2x or faster CD-ROM drive (required for installation)
●
A direct connection to a computer for full functionality requires a USB port or a parallel port.
NOTE: If the USB port has another device attached to it, such as an external storage device, the
device must be disconnected or an additional USB port must be added. You can add an additional
USB port by using a hub, or by installing an additional USB card.
Macintosh
For information about the HP LaserJet P2010 Series printing-system software for Macintosh operating
systems, see
Macintosh software and utilities on page 103.
Linux
You can also print to the HP LaserJet device from any operating system that complies with the PCL
command language, such as OS/2, UNIX, or Linux systems.
Linux users should check for the availability of drivers at the following Web site:
www.hp.com/go/linuxprinting
NOTE: The Linux drivers are supported by the HP Linux team, and the HP Linux team works with the
Linux community to provide solutions.
4 Chapter 1 Purpose and scope ENWW