HP Color LaserJet CM4730 MFP - Job Aid - Output Devices

ManualsBrandsHP ManualsDesktopsHP Color LaserJet CM4730 Multifunction Printer

HP Color LaserJet CM4730 MFP – Output Devices

Development Company, L.P.

www.hp.com

How do I Steps to perform

1 Use standard output bins When you scan or copy documents by using the

Automatic Document Feeder (ADF), the originals are

automatically delivered to the ADF output bin (1a).

Copies and print jobs are delivered to the standard

output bin (1b) or the output bin(s) on the stapler/stacker

or the 3-bin mailbox.

How do I Steps to perform

2 Use the 3-bin mailbox If you are using the 3-bin mailbox, three output bins are

available. Configure these bins as individual mailboxes,

or combine them to function as a single bin to stack

documents.

The top two bins each hold up to 100 sheets of paper. A

sensor stops the MFP when a bin is full. MFP operation

continues when you empty or reduce the amount of

media in the bin.

The lower bin holds up to 500 sheets of paper.

Summary of content (3 pages)

PAGE 1
HP Color LaserJet CM4730 MFP – Output Devices 1a How do I 1 Use standard output bins How do I 2 Use the 3-bin mailbox Steps to perform 1b When you scan or copy documents by using the Automatic Document Feeder (ADF), the originals are automatically delivered to the ADF output bin (1a). Copies and print jobs are delivered to the standard output bin (1b) or the output bin(s) on the stapler/stacker or the 3-bin mailbox. Steps to perform If you are using the 3-bin mailbox, three output bins are available.
PAGE 2
HP Color LaserJet CM4730 MFP – Output Devices How do I 3 Use the stapler/stacker How do I Steps to perform ○ It can staple jobs of up to 30 sheets of 75 g/m2 (20 lb) paper. ○ It can staple letter-size, A4-size, legal-size paper, Executive (JIS), and 8.5 x 13. ○ It can stack up to 500 sheets of paper. ○ Paper weight can range from 60 to 120 g/m2 (16 to 32 lb). ○ If the job consists of only one sheet or more than 30 sheets, the MFP will print the job to the bin, but will not staple the job.
PAGE 3
HP Color LaserJet CM4730 MFP – Output Devices How do I 6 Set the stapling options for each job (stapler/stacker only) 7 Select an output bin for print jobs (3-bin mailbox only) Steps to perform a. On the File menu in the software program, click Print. b. Select the driver, and then click Properties or Preferences. c. Click the Output tab. d. In the Staple box, select the stapling option that you want to use for the print job. e. Click OK. a. On the File menu in the software program, click Print. b.