HP Color LaserJet CP2020 Series - Software Technical Reference

Paper source:
The Paper source: setting specifies the source tray to use for printing a document. The list of source
trays depends on the product accessories that are installed. Any optional source trays that are installed
through the Device Settings tab also appear here.
The Paper source: drop-down menu can contain the following options:
●
Automatically Select
●
Printer auto select
●
Manual Feed in Tray 1
●
Tray 1
●
Tray 2
●
Tray 3
The default setting is Automatically Select. When this is selected, the HP Color LaserJet CP2020
Series printer uses the source tray that supports the selected paper size. For the other options, make
sure the correct paper size is loaded in the source tray.
Paper type:
The Paper type: drop-down menu shows a selection of the paper types that the HP Color LaserJet
CP2020 Series printer supports. When you use the default setting, Unspecified, the product uses the
default paper type, which is usually Plain.
To view additional supported paper types, select More in the Paper type: drop-down menu. The Type
is: box opens. Select one of the additional paper types and click OK. Now this option will be available
in the Paper type: drop-down menu.
Figure 4-11 Type is: box
The additional supported paper type available via the Type is: box are included in the following table.
Table 4-10 Paper type: – Type is: supported paper types and associated engine speeds
Paper category Paper type Engine speed
Everyday < 96g
●
Unspecified
●
Plain
●
HP LaserJet 90g
●
Full
●
Full
●
3/4 Speed (6 ppm)
192 Chapter 4 HP PCL 6 print driver and HP PS Universal Print Driver for Windows ENWW
HP PCL 6 print driver and
HP PS Universal Print
Driver for Windows