HP Color LaserJet CP2020 Series - Software Technical Reference

Paper category Paper type Engine speed
●
Heavy Rough
●
HP Tough Paper
●
3/4 Speed (6 ppm)
●
3/4 Speed (6 ppm)
No mechanism exists for manually adding custom paper types through the driver.
The default setting is Unspecified. Before selecting a different setting, make sure that the correct paper
type is loaded in the tray that is specified in the Paper source: setting.
If the print-driver setting is changed to a paper type that is not currently loaded in the product and the
tray is configured for a specific paper type, a control-panel message prompts you to load the paper type
or select another tray.
Caution symbols may appear next to some paper types in the selection list. This means that there is
another setting that may be in conflict with the selected paper size. For example, if “print on both sides”
is selected in the Finishing tab, then the Transparency paper type will have a Caution sign next to it
because transparencies can only be printed on a single side.
Special pages
To specify special pages to be used, click the Settings button under Special Pages.
Covers
To use specify cover settings, click Covers on the Special Pages window.
Use the Covers options to include a blank or preprinted cover on a document, or to include a front/back
cover from a source tray that is different from the one used for the remainder of the document.
The following figure shows the Covers setting and options.
Figure 4-12 Paper/Quality tab – Special pages – Covers
Table 4-10 Paper type: – Type is: supported paper types and associated engine speeds (continued)
194 Chapter 4 HP PCL 6 print driver and HP PS Universal Print Driver for Windows ENWW
HP PCL 6 print driver and
HP PS Universal Print
Driver for Windows