HP Color LaserJet CP2020 Series - Software Technical Reference

When the Print on Both Sides (Manually) check box is available on the Document Options section

of the Finishing tab screen, follow these steps to make the HP Color LaserJet CP2020 Series printer

manually print on both sides.

1. Select the Print on Both Sides (Manually) check box.

2. Click OK.

3. Click Print. The even-number pages of the document print.

4. Insert the stack of even-number pages that just printed when the control panel shows the Manually

Feed message (or it shows the Load Tray message), insert the stack of paper (on which the even-

numbered pages have been printed).

Figure 4-22 Finishing tab – Print on Both Sides instruction windodw

5. Click the OK button on the product control panel.

6. The odd numbered pages print on the second side (blank) of the stacked sheets.

Flip Pages Up option

Select the Flip Pages Up check box to specify the duplex-binding option. (The Flip Pages Up option

is only available when Print on Both Sides is selected.) By default, the Flip Pages Up check box is

not selected. The following table shows the results of selecting this box, depending on the paper