HP Color LaserJet CP2020 Series - Software Technical Reference

not affected by the current print job. Using Ctrl-D might cause a print job to fail if the product is connected
through a network. If the document fails to print when sent to a network product, change Yes to No.
Convert Gray Text to PostScript Gray
This control specifies whether to convert the true gray value (RGB) in text to the gray that the driver
provides. The following settings are available:
●
Yes
●
No (default)
Convert Gray Graphics to PostScript Gray
This control specifies whether to convert the true gray value (RGB) in graphics to the gray provided by
the driver. The following settings are available:
●
Yes
●
No (default)
Add Euro Currency Symbol to PostScript Fonts
This control specifies whether to add the euro symbol to the printer fonts. The following settings are
available:
●
Yes (default)
●
No
Job Timeout
This control specifies how long the document can take to get from the computer to the product before
the product stops trying to print the document. If you specify 0 seconds, the product continues trying
to print indefinitely. The default setting is 0 seconds. Use the spin box to change this value, up to a
maximum of 32,767 seconds.
Wait Timeout
This control specifies how long the product waits to get more postscript information from the computer.
After the specified time passes, the product stops trying to print the document and prints an error
message. When printing a very complicated document, increase this value. If you specify 0 seconds,
the product waits indefinitely. The default setting is 300 seconds. Use the spin box to change this value,
up to a maximum of 32,767 seconds.
Minimum Font Size to Download as Outline
This control specifies the minimum font size (in pixels) for which the driver downloads TrueType fonts
as outline (Type 1) fonts. Any font smaller than the minimum setting is downloaded as a bitmap (Type
3) font. Use this option to fine-tune the Automatic setting for the TrueType Font Download option on
the Advanced tab in Document Defaults. The default setting is 100 pixel(s). Use the spin box to
change this value, up to a maximum of 32,767 pixels.
Maximum Font Size to Download as Bitmap
This control specifies the maximum font size (in pixels) for which the driver will download TrueType fonts
as bitmap (Type 3) fonts. Any font larger than the maximum setting will be downloaded as an outline
ENWW Device Settings tab features 225
HP PCL 6 print driver and
HP PS Universal Print
Driver for Windows