HP Color LaserJet CP2020 Series - Software Technical Reference

●
Shadows. Shadow colors are colors near solid density. To make shadow colors darker, use a
positive shadow setting. To make shadow colors lighter, use a negative shadow setting. This
adjustment does not affect highlight or midtone colors.
●
Restore defaults. Resets factory defaults for the Print Density settings on the printer.
NOTE: Click Apply to make the changes take effect.
Paper Types
Use the Paper Types screen to map the print modes that the printer will use for each paper type.
Figure 2-28 HP ToolboxFX Paper Types screen
The purpose of this menu is to specify the engine print mode for paper types that are non-specific. Also,
the Plain paper type can be remapped for workflow reasons. A print mode is a special setting that
controls the print speed and the fuser temperature of the printer. The product speed and fuser
temperature are adjusted to match the print mode selected, which can result in better print quality when
printing on certain paper types.
WARNING! Printing on heavier paper, such as glossy or photo paper, without setting the correct print
mode can cause damage to the printer.
NOTE: Not all of the paper types listed in the driver can be adjusted on the Paper Types screen.
Table 2-3 Standard print modes
Standard print modes Target media/weight Print speed Color tables
Normal Mode 75-90 g/m2 Full speed Plain
Heavy Mode 90-130 g/m2 3/4 speed Plain
Cardstock Mode 131-175 g/m2 3/4 speed Plain
Light Mode 60-74 g/m2 Full speed Plain
ENWW HP ToolboxFX 67
Software Description