HP Color LaserJet CP2020 Series - Software Technical Reference

Figure 2-30 HP ToolboxFX Extended Print Modes screen (2 of 2)
The Extended Print Modes screen contains a Print Modes section and an Optimize section.
Table 2-8 Optimize modes
Adjustment Range (*default) Description
Background Toner Off*/On Optimize printer settings to reduce
background toner. (Glossy paper picks
up background toner more readily than
plain paper.)
Background Toner 2 This is designated when a background of
small vertical lines appears on the
image.
Extra Drum Cleaning Off*/On Talc from paper with high talc content
gets coated on the imaging drums and
degrades the image quality. The printer
will use extra cleaning rotations when
stopping to eliminate this coating on the
drums.
Drum Banding Off*/On This mode reduces the occurrence of
sharp lines at the OPC drum pitch (75
mm) by extra prerotations and by jogging
the drums slightly after each job. The
jogging motion is slightly audible.
Registration Extends the pre-rotation and post-
rotation sequences.
Tray 1 When this option is turned on and a print
job is printing from Tray 1 using the
universal size command, which is the
default, the printer will clean the belt
every time the printer spins down.
Re-Transfer This setting reduces or eliminates re-
transfer.
ENWW HP ToolboxFX 71
Software Description