HP LaserJet P4010 and P4510 Series - Software Technical Reference

NOTE: The HP LaserJet P4010 and P4510 Series printer does not support infrared connections.
If you select Connect to the network (using a parallel cable), and then click Next, the Identify a
printer dialog box opens. (See
Figure 3-34 Identify a printer dialog box on page 100.)
For a network installation, the HP LaserJet P4010 and P4510 Series printer must be connected to the
network and turned on before the printing-system software is installed so that the software can detect
the device.
If you select Connect directly to this computer (using a USB 2.0 cable), and then click Next, the
Cable Type dialog box opens.
NOTE: The printing-system software should be installed before the HP LaserJet P4010 and P4510
Series printer is connected to the computer through a parallel or USB connection and turned on. During
the installation process, the software will prompt you to connect the device.
NOTE: For wireless installation instructions using an HP Jetdirect ew2400 802.11g Wireless Print
Server or an HP Direct 380x802.11B wireless print server, consult the documentation that comes with
the print server.
Figure 3-32 Cable Type dialog box
Click the preferred connection type: USB Cable or Parallel Cable.
The Models dialog box opens.
98 Chapter 3 Installing Windows printing-system components ENWW