HP LaserJet P4010 and P4510 Series - Software Technical Reference

Defaults. The default setting is 600 pixel(s). Use the spin box to change this value, up to a maximum
of 32,767 pixels.
Postscript Passthrough
Postscript Passthrough is enabled by default, and must be enabled for most print jobs. Postscript
passthrough provides additional capabilities for some software programs when printing to a postscript
driver. Options such as Watermarks, Pages per sheet and Booklet Printing might not print correctly
from some software programs with Postscript Passthrough enabled, because such programs send
postscript information that the driver cannot control. Other programs might print using these options
without problems. Select Disabled and print the document again if you encounter problems.
NOTE: In some cases, disabling Postscript Passthrough can cause unexpected results within a
software program.
JPEG Passthrough
The JPEG Passthrough setting contains the following options:
●
Disable. When this option is selected, images sent as JPEG are printed as bitmaps, resulting in
faster printing.
●
Enable. When this option is selected, images sent as JPEG are printed as JPEG (JPEG
passthrough).
●
Auto. (This is the default.) When this option is selected, the printer connection type is automatically
detected. For network (TCP/IP) connections, JPEG passthrough is disabled. For DOT4 and USB
connections, JPEG passthrough is enabled.
182 Chapter 4 HP PCL 5, PCL 6, and PS emulation drivers for Windows ENWW