User Guide

Wireless
Protected
Setup
(WPS).
and clear
the error.
On On Signal bars
displayed
Off Off Wireless
Protected
Setup
(WPS)
successful.
The
product can
now print
wirelessly.
Flashing lights
The lights on the product flash in special sequences to inform you about various error
conditions. Refer to the following table for information on solving your error condition
based on which lights are on or flashing on the product.
Table 7-2 Flashing lights
On light Ink level
indicator
Resume light Error light Description Solution
Off Off Off Off The product is
turned off.
Press the
On button to
turn the
product on.
Blinking Current ink
levels
Off Off The product is
processing a
job.
Wait for the
product to
finish.
Fast blinking
for 3 seconds
Current ink
levels
Off Off The product is
processing a
job or it is in an
error state,
other than a
print cartridge
error.
Wait for the
product to
complete the
job before
initiating a
new job.
On Current ink
levels
Fast blinking Off The product is
out of paper.
The product
has a paper
jam.
Load paper
and press
Resume.
Clear the
paper jam,
and then
press
Resume.
On Current ink
levels
Off Fast blinking The front
access door or
the print
cartridge
access door is
open.
Close the
front access
door or the
print
cartridge
access door.
On Both fast
blinking
Off Fast blinking The print
cartridges are
missing or not
Install or
remove and
reinsert print
cartridges.
Chapter 7
Wireless indicator lights (continued)
48 Solve a problem
Solve a problem