User manual

To test your fax setup from the control panel
1. Set up the product for faxing according to your particular home or office setup
instructions.
2. Insert the print cartridges and load full-size paper in the input tray before starting the
test.
3. Press the button next to Scan/Fax.
4. Press the button next to Fax Menu.
5. Press the button next to Fax Setup.
6. Press the button next to the down arrow to highlight Run Fax Test, and then press
the button next to OK.
The status of the test appears on the display. The product also prints a detailed report.
7. Review the report.
• If the test passes and you are still having problems faxing, check the fax settings
listed in the report to verify the settings are correct. A blank or incorrect fax setting
can cause problems faxing.
• If the test fails, review the report for more information on how to fix any problems
found.
8. After you pick up the fax report, press the button next to OK.
If necessary, resolve any problems found and rerun the test.
Chapter 2
26 HP Photosmart C4340 All-in-One series
English