CC330 Digital Camera User Manual
ii
WARNING Do not expose the camera or other accessories to rain or humidity to prevent fire hazard or electric shock. For customers in the U.S.A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
SAFETY PRECAUTIONS Camera notes: Do not store or use the camera in the following types of locations: • In the rain, very humid and dusty places. • In a place where the camera can be exposed directly to the sunlight or subject to high temperature, e.g. Inside a closed car in summer. • In a place where the camera is subject to a high magnetic field, e.g. near motors, transformers or magnets.
BEFORE YOU START Preface Thank you for purchasing this HP digital camera. Please read this manual carefully and keep it in a safe place for future reference. Copyright © Copyright 2011 Hewlett Packard All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form, by any means, without the prior written permission of Hewlett Packard.
LCD Screen notes: Extremely high-precision technology had been used to manufacture the LCD screen so that most of the pixels are operational for use. However, there may be some minute points (black, white, red, blue or green) that constantly appear on the LCD screen. These points are normal in the manufacturing process and the recording is not affected in any way. Avoid exposing the LCD screen to water; please remove any moisture on the LCD screen with dry and soft cleaning cloth.
CONTENTS WARNING .............................................................................................1 SAFETY PRECAUTIONS .....................................................................2 BEFORE YOU START ..........................................................................3 Preface .......................................................................................................................................... 3 Copyright ..........................................................
Flash ........................................................................................................................................ 16 Self-timer.................................................................................................................................. 16 Macro Mode . ........................................................................................................................... 16 Exposure Compensation.............................................................
Gathering.................................................................................................................................. 21 ID.............................................................................................................................................. 21 Fish eye.................................................................................................................................... 21 Travel shooting..............................................................
Protect ..................................................................................................................................... 28 Delete ...................................................................................................................................... 29 DPOF (Digital Print Order Format) .......................................................................................... 29 Trim .........................................................................................
Connecting to a PictBridge Compatible Printer ........................................................................... 36 Setting the USB Mode ............................................................................................................. 36 Connecting the Camera and Printer ........................................................................................ 36 Using the PictBridge Menu . ...................................................................................................
GETTING READY Unpacking Your package should contain the camera model you purchased along with the following items. If anything is missing or appears to be damaged, please contact your vendor. AA-size Alkaline Batteries Warranty Card CD-ROM USB Cable Wrist Strap Camera Views Front View 1 2 3 4 10 1. Flash Lamp 2. Timer Indicator 3. Lens 4.
Back View 5 6 7 8 9 5. LCD Screen 6. Status Indicator 7. Zoom Toggle 8. Playback Button 9. Menu Button 10. Mode Selection Button 11. Display/Up Button 10 12. Flash Mode/Right Button 15 11 14 12 13. Delete Button/Down Button 14. Face Detection/Left button 13 15. Function/OK Button Left / Right View 16. USB/AV Port 16 17. Wrist Strap 17 Top / Bottom View 18. Shutter Button 19. Power Button 18 20. Speaker 20 19 21. Card Slot/Battery Compartment 22.
Insert the Battery and SD/SDHC Card (Not included) 1. Open the battery compartment. 2. Insert the enclosed batteries into the battery slot in the correct direction. 3. Insert an SD/SDHC card (not included) into the memory card slot as shown. 4. Close the battery compartment. Optional SD/SDHC cards are not included. The use of 64MB to16 GB memory cards from recognized manufacturers such as SanDisk, Panasonic and HP is recommended for reliable data storage.
Turning On and Off Press the Power button to turn the camera on. To turn off the camera, press the Power button again. Power Button When the camera is turned on, it will be at the same shooting mode based on the last use. You can press the Mode button to select a different one after it is on. When using the camera for the first-time, the language setting page will appear. See next page for Language setting process.
Setting Date/Time and Language The Date/Time and Language setup will automatically appear when the camera is turned on the first time. To set the language, date, and time, go to the following setup options in the Setup menu. • Language • Date / Time To access the Setup menu, do the following: 1. Press Power to turn the camera on. 2. Press the button, switch among the setting menus by using the Left/Right button to select the corresponding basic setting menu . Setting the Language 1.
BASIC OPERATION Shooting in Auto Mode Auto mode is the easiest mode to take photos. While operating in this mode, the camera automatically optimizes your photos for best results. To start shooting, do the following: 1. Press Power to turn the camera on. 2. In the Mode menu, select the Auto mode ( 3. Compose your picture on the LCD screen and press the Shutter button halfway to focus on the subject. 4. The LCD screen will show a green focus frame after the subject is in focus. 5.
3. Press button to confirm the settings and exit the menu, or press Down button to enter the selection screen of Basic Function. 4. Press Left/Right button to select the basic functions required to set, press Up button to enter the setting screen for selecting basic functions, or press button to confirm the settings and exit the screen. Flash Mode Name Icon Description Flash : Auto Camera flash goes off automatically based on existing light conditions.
Advanced Functions Menu The Advanced Functions Menu of the camera include Image Size, Image Quality, White Balance, Image Color and ISO etc. The suitable function setting can let you shoot better photos and videos. Set the advanced functions as per the following steps: 1. Pull up the Advanced Function Menus by pressing button. 2. Press Left/Right button to select the settings of the required function. 3.
WB (White Balance) The White Balance allows you to adjust the color temperature under different light source to ensure faithful color reproduction. The options of White Balance include: WB : Auto (default setting) WB : Daylight WB : Cloudy WB : Fluorescent WB : Fluorescent CWF WB : Incandescent WB : Manual (Press the shutter button to set WB) Color The color setting allows you to add artistic effects directly when taking pictures. You can try different color tones to alter the mood of your pictures.
USING THE MODES LCD Screen Display Still Picture Mode Display 1 1 3 4 5 Shooting Mode Icons Auto mode Panorama mode Scene mode Stabilization mode 16 6 15 7 14 13 12 Portrait 2 2 8 9 AF (Auto Focus) Mode 11 Single-AF 3 17 Multi-AF 18 Exposure Metering Spot Center AiAE 4 Zoom Scale 17 Macro Mode 5 Remaining number of pictures 18 Self-timer 6 Battery Status 19 Flash Mode 7 Memory card/built-in memory 20 Focus Frame 8 White Balance 9 Exposure 10 ISO Value 11 Histo
Video Shooting Mode Display 1 Video Mode icon 2 Continuous AF (Auto focus) 1 2 3 4 5 6 11 Single-AF 7 10 3 Exposure Metering Spot 9 Center 8 AiAE 4 Zoom Scale 5 Remaining time for Video Recording 6 Battery Status 7 Memory Card/Built-in Memory 8 Exposure 9 Self-timer 10 Focus Mode 11 Video Quality 12 Recording Status Icon Recording standby 12 Recording For optimal video shooting, it is recommended that the SD card be used.
Scene mode In Manual Scene mode, you can select from a total of 20 scene types to match your needs. You just need to select the right scene for the occasion and the camera will automatically adjust to the optimal settings for you. Press the button, highlight the Scene Mode icon Left/Right button. Press the with the to enter the Scene mode menu. Select a scene using the Left/Right button and press the press the button, or to exit the menu.
Panorama mode Panorama mode allows you to create a panoramic picture across a distant scene. The camera will automatically compose a panoramic picture using the individual shots that you take. Follow these steps to create a panoramic picture: and use the Right button to highlight the Panorama Mode ( ) and press the to enter. 1. Press the 2. Use the Left/Right buttons to specify the direction of picture taking, and then in 2 seconds the panoramic sequence will commence automatically. 3.
Stabilization mode This mode can help reduce photo blur caused by a shaky hand, low light and slow shutter speed. Use stabilization mode in dark environments or when in slow shutter speed. Shooting in a windy or unstable environment (such as a moving vehicle) may cause blurred images. Face Detection In the Shooting mode (except for Panorama Mode/Movie Mode), Face Detection is enabled by default so that faces will be automatically focused for clearer pictures.
PLAYBACK Viewing Photos and Videos 1 2 3 To view the captured photos and video clips on the LCD screen: 1. Press button to go to the Playback mode. The last recorded photo or video clip is displayed. 2. Use the Left/Right navigation buttons to scroll through the photos or video clips stored in the internal memory or memory card. 3. To play a selected video clip, press the the movie playback mode. 4 5 6 button to enter During video playback, the operating instructions will appear on the screen.
Using Zoom Playback (for still pictures only) The zoom toggle can be used during playback. This allows you to magnify photos up to 2 ~ 8X. button to go to the Playback mode. 1. Press 2. Use the Left/Right navigation buttons to select a photo to magnify. 3. Press one end of the Zoom toggle ( 4. Use the Zoom toggle to zoom in and out. The zoom indication and the frame of the whole photo shall display on the screen. 5. Use the navigation buttons to pan across the image. 6. Press the ) to zoom in.
USING THE MENUS Still Menu In any of the above Still Picture Modes, press the button to go to the Still Picture menu. To adjust each setting: 1. In the Still Picture menu, switch between different Photo Setup or Camera Setup pages using the Left/Right button, to select the page with the function you want to adjust and press the Down button. 2. Press the Up/Down buttons to select the function. 3. Press the Right button to go to the submenu. 4.
Continuous Shot Use this setting to perform continuous shooting. Once in this mode, you must continuously hold down the Shutter button to use this function. There are five available options: OFF Turn off Continuous Shot function. Unlimited Press and hold the shutter to shoot continuously until you release the shutter or when the memory card has run out of space. 3 shot Capture up to 3 consecutive pictures.
Movie Menu In the Movie Mode, press the Movie menu. button to go to the corresponding To configure each setting: 1. In the Movie menu, switch between the Movie Setup or different Camera Setup pages using the Left/Right button, select the page with the function you want to adjust and press the Down button. 2. Press the Up/Down button to select the function and press the Right button to go to the submenu. 3. Press the Up/Down button to select an option or the Left or 4. button to return to the menu.
2. Press the Up/Down button to select the protection setting option and press the Right button to go to the submenu. 3. Use the Up/Down button to select One to lock the selected picture or video, or select All to protect all pictures/videos stored in the built-in memory or memory card. 4. Press the button to select Yes to lock. For locked picture/ video, use Unlock option to unlock it. ) icon will appear on the top of the screen to indicate that the picture/video is protected. 5. A key ( 6.
Trim The Trim setting allows you select an area of the photo you want to keep and then save it as a new photo. To trim a picture: 1. Select the Trim setting from the 2. Using the Left/Right buttons, locate the photo that you want to crop and have it displayed on the LCD. 3. Use the zoom toggle and navigation buttons to adjust the trimming box to fit the location and size of the new picture. 4.
2. Use the Left/Right button to select the picture from which the red-eye needs to be removed. 3. Use the Up/Down navigation buttons to select Yes to fix the selected image or Back to cancel and return to the Playback menu. 4. Press the button to confirm the setting. For best results, the face of the subject should be relatively large on the LCD screen, the subject should be facing the camera as front on as possible, and the red eyes should be as large as possible.
Startup Screen: Use Up/Down button to select the Startup Screen option, press confirm or press Left button to return to last page, and press to to exit the menu. User GE logo Set back to defaults: Use Up/Down button to select Set back to defaults, press to confirm or press Left button to return to last page, and press to exit the menu. Yes No Setup Menu The Setup menu for the camera is available in all modes.
LCD Brightness Use this setting to adjust the brightness of your LCD screen. 1. Select the LCD Brightness setting from the Setup menu as described previously. 2. Select auto or adjust the brightness level using the Left/Right button, and press the button to confirm the setting. Power Saver This setting allows you to save power and get the maximum possible running time for your battery. Follow the steps below to turn off the LCD screen and camera automatically after a period of inactivity. 1.
File and Software Format Memory Please note: formatting enables you to delete all contents in the memory card and built-in memory, including protected photo and movie files. To use this setting: 1. Select the Format in File and Software menu. 2. Use the Up/Down navigation buttons to select Yes or No. Then press the 3. button to confirm. The current media is formatted. File Numbering After you take a picture or video clip, the camera will save it as file that ends with a serial number.
Transmission Video System Use this setting to determine your video system in the current area. 1. 2. Select the Video System in Connection Setup menu. Use the Up/Down navigation buttons to select NTSC or PAL. Then press the button to confirm. The video output signal can be switched to NTSC or PAL to accommodate different regional standards. The appropriate setting will vary between regions. NTSC USA, Canada, Taiwan, Japan, etc. PAL Europe, Asia (excluding Taiwan), Oceania, etc.
If the USB option is set to [PC] : If the USB option is set to [PC (PTP) ] : Turn the camera off and disconnect the USB cable. Remove the camera from the system as described below before turning the camera off and disconnecting the USB cable. Windows operating system (Windows 2000, Windows Macintosh XP, Windows Vista, Windows 7.) Drag the untitled Click the [Safely remove the hardware] icon and remove icon to the Trash. the USB connector according to the appeared menu.
Using the PictBridge Menu After setting the USB mode to Printer, the PictBridge menu appears. Select a menu item with the Up/Down button and press the Right button or button to enter the item. Refer to the following sections for more detailed information on each setting. Print with date If you have set the date and time of your camera, the date and time will be recorded and saved with each photo you take. 1. Select Print with date from the PictBridge menu. The following screen appears. 2.
Print index You can use this setting to print all indexes to show all the photos currently in your camera. 1. Select Print index from the PictBridge menu. The following screen appears. 2. Select Yes to confirm the printing, or Cancel. Then press the button. Print DPOF (Digital Print Order Format) To use DPOF printing, you must make the selection of photos for printing using the DPOF settings before hand. See “DPOF” section on page 29. 1. Select Print DPOF from the PictBridge menu.
APPENDICES Specifications Effective Pixels 14.0MP (4320×3240) Sensor Type 1/2.3" CCD Lens Focal Length 5.2mm (Wide) ~ 15.6mm (Tele) Aperture F3.5 (Wide) ~ F6.4 (Tele) Zoom Resolution 3X optical zoom, 6X digital zoom Still Image 14MP, 12MP(3:2), 10MP(16:9), 8MP, 5MP, 3MP, 0.3MP Movie 640x480pixels: 30fps/15fps, 320x240pixels: 30fps/15fps Image Compression File Format Best, Fine, Normal Still Image Exif 2.2 (JPEG) Movie Quick Time Motion JPEG, Audio: G.711 [Monaural]) LCD Display 2.
Error messages Messages Explanation No card • The memory card is not inserted. Card error • The memory card is not formatted. • The memory card is full and cannot store any new images. Write protect • The memory card is write-protected. Picture error • • The picture is not captured correctly. The picture is damaged. • There are no images in the memory card or in the internal memory. • The lens is probably stuck and the camera will power off automatically. • Unexpected error encountered.
Troubleshooting Problem Camera does not turn on. Camera turns off suddenly during operation. The picture is blurred. Possible causes • • The battery has run out. The battery is not inserted correctly. • The battery has run out. • • The lens is dirty. appears when taking pictures. • The memory card is full. Solution • Replace with a fully charged battery. • Replace with a fully charged battery. • Use a soft cloth to clean the lens on your camera Use the Image Stabilization mode.
Getting Help Should you have a technical support question or your HP Digital Camera require service within the warranty period, please contact the original point of purchase or an authorized HP reseller in your country. If service is not available at those locations, please contact an HP Branded Product warranty agent from the support contact list provided below.
Contact/phone Support: Country Language Number Europe Region (EMEA) België Nederlandsk/ Deutsch + 32 2700 1724 Deutschland Deutsch + 49 6950073896 España Español + 34 914533458 France Français + 33 171230454 Ireland English + 353 1850882016 Italia Italiano + 39 269682189 Nederland Nederlandsk + 31 202015093 Schweiz Deutsch/ Français/ Italiano + 41 18009686 UK English + 44 2073652400 United States English 1.866.694.7633 Canada English and Français 1.866.694.
P/N: 7525C00257A
