HP Color LaserJet Enterprise CP4020/CP4520 Series Printer - Load Tray 2 and optional Trays 3, 4, and 5 with custom-size paper

HP Color LaserJet Enterprise

CP4020-CP4520 Series Printer

Load Tray 2 and optional Trays 3, 4, and 5 with custom-size

paper

1. Open the tray.

2. Adjust the paper-length and paper-width

guides by squeezing the adjustment latches

and sliding the guides to the size of the paper

being used.

3. Load paper into the tray. Check the paper to

verify the guides lightly touch the stack, but do

not bend it.

Company, L.P.

1 www.hp.com/support/cljcp4025

www.hp.com/support/cljcp4525

PAGE 1
HP Color LaserJet Enterprise CP4020-CP4520 Series Printer Load Tray 2 and optional Trays 3, 4, and 5 with custom-size paper 1. Open the tray. 2. Adjust the paper-length and paper-width guides by squeezing the adjustment latches and sliding the guides to the size of the paper being used. 3. Load paper into the tray. Check the paper to verify the guides lightly touch the stack, but do not bend it. © 2009 Copyright Hewlett-Packard Development Company, L.P. 1 www.hp.com/support/cljcp4025 www.hp.
PAGE 2
4. Close the tray. 5. The control panel prompts you to set the paper size and type. Select the CUSTOM setting, and then configure the X and Y dimensions of the custom paper size. NOTE: See the label in the paper tray, or the following illustration, to determine the X and Y dimensions. Y X © 2009 Copyright Hewlett-Packard Development Company, L.P. 2 www.hp.com/support/cljcp4025 www.hp.