HP Color LaserJet Enterprise CP4020/CP4520 Series Printer - Load Tray 2 and optional Trays 3, 4, and 5 with standard-size paper

HP Color LaserJet Enterprise

CP4020-CP4520 Series Printer

Load Tray 2 and optional Trays 3, 4, and 5 with standard-

size paper

1. Open the tray.

NOTE: Do not open the tray while it is in use.

2. Adjust the paper-length and paper-width

guides by squeezing the adjustment latches

and sliding the guides to the size of the paper

being used.

3. Load paper into the tray. Check the paper to

verify the guides lightly touch the stack, but do

not bend it.

NOTE: To prevent jams, do not overfill the

tray. Be sure the top of the stack is below the

tray full indicator.

NOTE: If the tray is not adjusted correctly, an

error message might appear during printing or

the paper might jam.

Company, L.P.

1 www.hp.com/support/cljcp4025

www.hp.com/support/cljcp4525

PAGE 1
HP Color LaserJet Enterprise CP4020-CP4520 Series Printer Load Tray 2 and optional Trays 3, 4, and 5 with standardsize paper 1. Open the tray. NOTE: Do not open the tray while it is in use. 2. Adjust the paper-length and paper-width guides by squeezing the adjustment latches and sliding the guides to the size of the paper being used. 3. Load paper into the tray. Check the paper to verify the guides lightly touch the stack, but do not bend it. NOTE: To prevent jams, do not overfill the tray.
PAGE 2
4. Close the tray. 5. The control panel shows the tray’s paper type and size. If the configuration is not correct, follow the instructions on the control panel to change the size or type. © 2009 Copyright Hewlett-Packard Development Company, L.P. 2 www.hp.com/support/cljcp4025 www.hp.