HP Color LaserJet Enterprise CP4020/CP4520 Series Printer - Load Tray 2 with 10 x 15 cm (4 x 6 in) size paper

HP Color LaserJet Enterprise

CP4020-CP4520 Series Printer

Load Tray 2 with 10 x 15 cm (4 x 6 in) size paper

1. Open the tray.

2. Adjust the paper-length and paper-width

guides by squeezing the adjustment latches

and adjusting the guides to the fully opened

position.

3. Fit the HP postcard media insert into Tray 2 and

then slide the insert to the right until it snaps

into place.

Company, L.P.

1 www.hp.com/support/cljcp4025

www.hp.com/support/cljcp4525

PAGE 1
HP Color LaserJet Enterprise CP4020-CP4520 Series Printer Load Tray 2 with 10 x 15 cm (4 x 6 in) size paper 1. Open the tray. 2. Adjust the paper-length and paper-width guides by squeezing the adjustment latches and adjusting the guides to the fully opened position. 3. Fit the HP postcard media insert into Tray 2 and then slide the insert to the right until it snaps into place. © 2009 Copyright Hewlett-Packard Development Company, L.P. 1 www.hp.com/support/cljcp4025 www.hp.
PAGE 2
4. Load 10 x 15 cm (4 x 6 in) paper into the tray. 5. Adjust the paper-length and paper-width guides by squeezing the adjustment latches and adjusting the guides to the fully closed position. 6. Close the tray. 7. The control panel prompts you to set the paper size and type. Select 10 x 15 cm (4 x 6 in) size paper. © 2009 Copyright Hewlett-Packard Development Company, L.P. 2 www.hp.com/support/cljcp4025 www.hp.