HP Color LaserJet Enterprise CP4020/CP4520 Series Printer - Replace the toner collection unit

HP Color LaserJet Enterprise

CP4020-CP4520 Series Printer

Replace the toner collection unit

Replace the toner collection unit when the control panel prompts you.

NOTE: The toner collection unit is designed for a single use. Do not attempt to empty the toner collection unit

and reuse it. Doing so could lead to toner being spilled inside the product, which could result in reduced print

quality. After use, return the toner collection unit to HP’s Planet Partners program for recycling.

1. Open the front door. Make sure that the door is

completely open.

2. Grasp the top of the toner collection unit and

remove it from the product.

Company, L.P.

1 www.hp.com/support/cljcp4025

www.hp.com/support/cljcp4525

PAGE 1
HP Color LaserJet Enterprise CP4020-CP4520 Series Printer Replace the toner collection unit Replace the toner collection unit when the control panel prompts you. NOTE: The toner collection unit is designed for a single use. Do not attempt to empty the toner collection unit and reuse it. Doing so could lead to toner being spilled inside the product, which could result in reduced print quality. After use, return the toner collection unit to HP’s Planet Partners program for recycling. 1. Open the front door.
PAGE 2
3. Place the attached cap over the opening at the top of the unit. 4. Remove the new toner collection unit from its packaging. © 2009 Copyright Hewlett-Packard Development Company, L.P. 2 www.hp.com/support/cljcp4025 www.hp.
PAGE 3
5. Insert the bottom of the new unit into the product first and then push the top of the unit until it clicks into place. 6. Close the front door. NOTE: If the toner collection unit is not installed correctly, the front door does not close completely. To recycle the used toner collection unit, follow the instructions included with the new toner collection unit. © 2009 Copyright Hewlett-Packard Development Company, L.P. 3 www.hp.com/support/cljcp4025 www.hp.