Basic Knowledge Manual

HP Photosmart D7200 series • 7
B1 - Ethernet
Locate your Ethernet cable.
Remove the yellow plug from the back of the
device.
Connect one end of the Ethernet cable to the
Ethernet port on the back of the device.
Connect the other end of the Ethernet cable to the
router (not in the Internet port).
Go to Section B2 of this Setup Guide to install your
software.
a.
b.
c.
d.
e.
Important: Your computer and the HP Photosmart must be on
the same active, working network.
If you are using a DSL or cable modem, make sure you do
not connect the Ethernet cable from the HP Photosmart to the
cable modem. Connect it to the router only.
㔍ⒿEthernet䟄冕ᇭ
♥⒉幍⮖卛槱䤓煓唁㙡⯃ᇭ
⺕Ethernet䟄冕䤓₏䵾扭㘴咂幍⮖卛槱䤓Ethernet
䵾♲ᇭ
⺕Ethernet䟄冕䤓♵₏䵾扭㘴咂恾䟀⣷᧤槭
Internet䵾♲᧥ᇭ
懻咂㷳ᇵ⸘孔㓚␛ᇶ䤓B2ᦉѫ⸘孔懾ↅᇭ
a.
b.
c.
d.
e.
ซὙ㌷䤓帰並㧉✛HP Photosmart㉔權⇜ℝ⚛₏₹扟嫛₼
䤓几八ᇭⰑ㨫∎䞷DSL㒥䟄冕庒Ⓟ屲庒⣷᧨庆䫽≬ₜ∎䞷
Ethernet䟄冕⺕HP Photosmart✛䟄冕庒Ⓟ屲庒⣷䦇扭᧨力⅔
⺕␅扭㘴咂恾䟀⣷ᇭ
