Basic operation guide

HP Photosmart D7200 series • 7
B1 - Ethernet
㔍Ⓙ㌷䤓Ethernet儫偩ᇭ
㕣⒉孬函卛槱䤓煒唁㙡檼ᇭ
⺖Ethernet儫偩䤓₏䵾抲㘴Ⓙ孬函卛槱䤓
Ethernet抲㘴⩯ᇭ
⺖Ethernet儫偩䤓♵₏䵾抲㘴Ⓙ恾䟀⣷ₜ尐抲㘴
ⒿInternet抲㘴⩯ᇭ
懘咂㦻ᇵ⸘孬㖖◦ᇶ䤓B2捷⒕⸘孬㌷䤓慮浣ᇭ
a.
b.
c.
d.
e.
摜尐ℚ檔᧶㌷䤓榊叵✛HP Photosmart㉔檗⇜㡋⚛
₏ぴ⇫₼䤓偁恾₼ᇭⰑ㨫㌷∎䞷䤓㢾DSL㒥儫偩
㠇㝩㳮᧨嵚䭉≬㌷㦹∎䞷Ethernet儫偩抲㘴
HP Photosmart咖儫偩㠇㝩㳮ᇭ♹♾⺖␅抲㘴Ⓙ恾
䟀⣷ᇭ
Locate your Ethernet cable.
Remove the yellow plug from the back of the
device.
Connect one end of the Ethernet cable to the
Ethernet port on the back of the device.
Connect the other end of the Ethernet cable to the
router (not in the Internet port).
Go to Section B2 of this Setup Guide to install your
software.
a.
b.
c.
d.
e.
Important: Your computer and the HP Photosmart must be on
the same active, working network.
If you are using a DSL or cable modem, make sure you do
not connect the Ethernet cable from the HP Photosmart to the
cable modem. Connect it to the router only.